• ts500hs first image
  • ts500hs-10_1348604789
  • ts500hs-13_1348604900
  • ts500hs-14_1348604943
  • ts500hs-15_1348604990
  • ts500hs-16_1348605041
  • ts500hs-17_1348605116
  • ts500hs-06_1347366633
  • ts500hs-05_1347366592
  • ts500hs-02_1348604570

TS500HS High Speed Salt Spreader

SKU:TS500HS
TS500HS High Speed Salt Spreader
 
  • The TS500HS achieved EC whole vehicle type approval (ECWVTA). A high speed trailed salt spreader with a hopper capacity of 0.5m3 to take approximately 600kg of salt. Capable of spreading wet or dry - brown or white salt via its unique Pozi-Feed stainless steel auger system. Fitted with high quality braked axles and road going wheels and tyres. The spreading circuit is powered by an on board electric start engine. The TS500HS ideal for gritting car parks and narrow lanes with a spread width of up to 8 metres. Light gross vehicle weight of only 1500kg - it can be used with small towing vehicles. A cost effective option for adding winter maintenance resilience.

    Specifications

    • 0.5 m3 mild steel hopper
    • Hydraulically driven stainless steel disc, with adjustable spread width from 1.8m to 8m
    • Manually adjustable spread width valve (graduated)
    • Symmetric and asymmetric patern achievable by adjusting the stainless steel feed chute
    • 100mm stainless steel Pozi-Feed double augers providing positive salt feed even with wet material, driven hydraulically through a heavy duty high load hydraulic motor
    • Pozi-Feed augers run in maintenance free nylon bushes
    • Manually adjustable application rate valve (graduated)
    • 60 litre hydraulic fluid tank complete with canister type spin-on return line filter, breather cap and sight gauge
    • Hydraulically powered from an on board Yanmar L70 N diesel auxiliary engine with battery
    • (Basic) In cab control box to control the following - Spreading disc/Auger on-off, Auger on-off, Auger reverse, Beacon and Work light
    • Heavy duty 50mm cast drawbar ball over-run coupling
    • High quality axles fitted with torsion spring suspension and automatic brakes
    • 8 ply road going wheels and tyres 
    • Single arch plastic mudguards
    • Jockey wheel
    • Galvanised pitched metal hopper cover with access hatch
    • All metal work blast cleaned, prior to zinc rich powder prime and finished in polyester powder coat finish
    • Full road lighting with high quality rubberized lighting components to resist salt corrosion
    • Rear mounted xenon low current beacon
    • Stainless steel fasteners used where possible
    • Fluorescent markings on rear

    Options

    • Wired to enable the spreading action to be controlled via the towing vehicles fog light switch meaning no control boxes are required to be wired to the vehicle, a seperate auger reverse switch and beacon switch is mounted to the control panel of the spreader. An LED work light cannot be fitted with this option.
    • (Width) In cab control box to control the following - Spreading disc/Auger on-off, Auger on-off, Auger reverse, Beacon, Work light, Spreading width control in lieu of manually adjustable spread width valve
    • (Width/Application) In cab control box to control the following - Spreading disc/Auger on-off, Auger on-off, Auger reverse, Beacon, Work light, Spreading width control in lieu of manually adjustable spread width valve, Application rate control in lieu of manually adjustable application rate valve
    • Rear mounted low current xenon beacon
    • Rear mounted LED work light (red) only available if the machine is specified with a control box  
    • High speed spreading disc to spread up to 15m 
    • 40mm ring hitch in lieu of the 50mm cast drawbar ball coupling
    • Spare wheel and tyre (supplied loose)

    Click here for Brochure